Elderberry Extract 5–25% Anthocyanins

Elderberry extract starts from the ripe black berries of Sambucus nigra, the European elder, and from no other part of the shrub. Ethanol extraction concentrates the pigment fraction of the fruit, and the liquor is dried to a purple red powder defined by its anthocyanin content.

The primary grade is 25% anthocyanins by UV with a pH-differential method, with a 5% grade as the lower end of the range. The powder is 80 mesh and water soluble. The 25% grade gives deep color at low inclusion, while the 5% grade keeps more of the berry’s sugars and acids for flavor.

Anthocyanin Standardization & Grades

Anthocyanins are the water-soluble pigments that color elderberry, and in Sambucus nigra they are cyanidin glycosides, mostly built on the two-sugar unit sambubiose. They change color with pH, which is why they can be counted by a pH-differential reading. An elderberry extract is standardized to them because they define the identity of the fruit and they determine how much color and body the powder delivers. Other constituents of the berry, such as sugars, organic acids and phenolic acids, are not counted in the figure, so the percentage describes the pigment share of the powder and not the share of the whole fruit that survived extraction. The botanical entity is Sambucus nigra L., and only the ripe berry is used.

GradeAssay & MethodWhere It Fits
5% AnthocyaninsUV (pH differential)Berry flavor drinks and gummy premixes
25% AnthocyaninsUV (pH differential)Capsules and tablets with small fill

Grade choice follows color strength, taste and fill weight. The 25% grade carries five times the pigment load of the 5% grade, so a capsule or tablet reaches its target in a small fill, and a drink gains color at a fraction of the inclusion. The 5% grade keeps more of the berry’s natural sugars and organic acids, which gives a tart, fruit-forward taste in sticks and gummies. The same berry is available as a 10:1 ratio extract with no marker figure, Elderberry Extract Powder, as a spray-dried juice powder, Elderberry Powder, and as a whole-berry powder, Freeze-Dried Elderberry Powder. The flower of the shrub is a different ingredient, the Sambucus Nigra Flower Extract Powder.

Anthocyanin Analysis & Purity Risks

The pH-differential method reads the sample twice, once in a strongly acidic buffer where monomeric anthocyanins are colored and once in a weakly acidic buffer where they turn colorless. The difference in absorbance counts the intact monomeric pigment and ignores brown degradation products and polymeric color, which do not switch. This makes it more selective than a single absorbance reading, yet it is still a total and not a list of individual compounds. The result is reported against a reference anthocyanin, so the reference is part of the method, and an HPLC figure from another laboratory cannot be converted into it.

Identity is confirmed by the pigment pattern. Elderberry carries cyanidin 3-sambubioside and cyanidin 3-glucoside among its leading pigments, and a chromatogram with that signature separates it from berries that look similar in the cup. Secondary markers include chlorogenic and other phenolic acids and flavonol glycosides of the fruit, which sit beside the pigments and are described here without numbers.

Purity risks follow from the material class. Anthocyanin extracts from cheaper dark fruit and vegetables, such as black carrot or purple sweet potato, give a similar color on a pH-differential test, so a total alone does not prove the botanical source. Species identity matters as well, since dwarf elder, Sambucus ebulus, is a different plant. Raw berries also contain cyanogenic compounds that heat reduces. A fixed species, a stated plant part and a pigment fingerprint, not a single percentage, are what protect identity.

Laboratory handling affects the reading. Anthocyanins fade in light and oxidize quickly in neutral solution, so the extract is dissolved in acidified buffer, read promptly and shielded from light during preparation. A sample left standing on the bench reads low, and two laboratories can disagree on the same elderberry extract if one of them waited. For that reason the method, the buffer and the reference pigment are always reported together with the result.

Typical Specifications

Specification ItemProduct Information
Latin NameSambucus nigra
Plant PartFruit & Berry
ProcessingEthanol Extraction
Compound ClassAnthocyanins, Flavonoids, Polyphenols
Common NameElderberry, European Black Elder
Ingredient TypeStandardized Extract
Marker Compound(s)Anthocyanins (cyanidin glycosides of Sambucus nigra berries)
Primary Grade25% Anthocyanins (UV, pH differential)
Available Grades5% · 25% Anthocyanins (UV, pH differential)
AppearancePurple Red powder
Solubility / DispersibilityWater Soluble
Quality Parameters
Moisture (LOD)≤5.0%
Total Ash≤5.0%
Particle Size80 mesh
Heavy MetalsLead ≤2 ppm · Arsenic ≤1 ppm · Cadmium ≤1 ppm · Mercury ≤0.1 ppm
MicrobiologyTPC ≤1,000 cfu/g · Yeast & Mold ≤100 cfu/g · E. coli Negative · Salmonella Negative/25 g
Shelf Life24 months in unopened original packaging, cool and dry storage

Applications by Grade

25% Grade for Compact Capsules

The 25% grade fills capsules at a small weight and gives a deep violet powder. The extract is hygroscopic and sticks to hoppers when the room is humid, so a dry filling area, a glidant and a desiccant in the bottle keep the line moving.

25% Grade in Coated Tablets

Tablets use the high grade because a small mass carries the pigment load. Anthocyanins stain, so a film coat that is pigmented or opaque protects the tablet from light and keeps the dark core from bleeding into the surface.

5% Grade for Gummy Premixes

Gummies take the lower grade for berry flavor and shade together. Add it after the cook, because heat browns the pigment, and keep the mass acidic with citric acid, which holds the red-purple tone and avoids a dull blue.

5% Grade for Drink Sticks

Sticks use the 5% grade in berry-style drink mixes, where the tart taste of the fruit is wanted as well as color. The extract dissolves in water to a clear red-purple liquid in acidic drinks, and it pairs with apple, citrus and honey flavors.

5% Grade in Syrup Premixes

Dry premixes for reconstituted syrups use the lower grade because the sugars and acids round out the taste. Dissolve the powder in warm water, check the finished pH, and fill into opaque or amber containers to protect the color.

Technical & Quality Considerations

The extract is a purple red powder with a tart, winey berry aroma and a slightly astringent taste. It is water soluble, so it dissolves into a clear to lightly hazy red-purple solution. The color depends on acidity: anthocyanins are red below about pH 3, purple around neutral and blue-grey to colorless in alkaline conditions, so the pH of the finished base decides the shade. Heat, light and oxygen degrade the pigment, and contact with iron or copper turns it dull and bluish.

For scale-up, work with stainless steel and keep the filling room dry, since the extract takes up moisture and cakes. Premix small inclusions with a dry carrier in two steps and check color at each lot change. Add the powder late in any warm step, fill liquids in opaque packaging with little headspace, and keep opened drums closed. Compare every lot with a retained sample for shade and solubility.

Taste matters in drinks. The berry carries a tart, slightly astringent edge, so an elderberry extract at the 5% grade needs sweetener and balancing flavors more than the 25% grade does, which is used in much smaller amounts. Trial a finished sample after a week at room temperature, because color loss and a brown cast often appear before any change in flavor.

Packaging & Commercial Supply

Essencefield supports product evaluation, formulation trials, commercial orders, and ongoing ingredient supply. Packaging, storage, and shipping arrangements are determined by product characteristics, order quantity, stability requirements, and destination-market needs.

Supply ItemGeneral Information
SampleAvailable upon request for formulation, testing, and supplier evaluation
Order Quantities100 g · 1 kg · 5 kg · 25 kg · 100 kg · 500 kg · Bulk
Sample Lead TimeTypically 5–7 days after sample confirmation
Production Lead TimeTypically 15–30 days after order and specification confirmation
PackagingSuitable protective inner packaging with bags, cartons, drums, or other appropriate outer packaging
StorageStore in tightly sealed, suitable protective packaging in a cool, dry environment. Protect from moisture, heat, and direct sunlight. Specific storage conditions follow the approved product specification.
DocumentationCOA · Product Specification · TDS · SDS · Applicable declarations (as applicable)

Final order quantities, lead times, packaging, documentation, and shipping arrangements are confirmed according to the selected product and commercial requirements.

Request Ingredient Specifications & Quote

Share your target specification, application, quantity, and documentation needs. We’ll help confirm suitable options, samples, and commercial supply details.