Bamboo Leaf Extract 70% Silica

Prepared from the dried leaves of bamboo, a grass whose leaf tissue accumulates silicon from the soil as hydrated silica, bamboo leaf extract is a silica-rich powder. Ethanol extraction removes the soluble leaf matter and concentrates the silica fraction, and the residue is dried to a green powder that is insoluble in water.

The grade is up to 70% silica. The powder is 80 mesh. It is meant for capsules, tablets and dry blends in which a silica-rich plant powder is the reason for choosing bamboo leaf, and the remaining weight is the polyphenol and fiber matrix of the leaf.

Silica Standardization & Grades

Grasses are among the plants that take up the most silicon. Bamboo leaf is a well-known example: the element is deposited as amorphous hydrated silica in the cell walls, where it makes up a large share of the leaf ash. Bamboo leaf also carries flavonoid C-glycosides such as orientin, isoorientin, vitexin and isovitexin, which give the green powder its polyphenol character. The botanical entity recorded for this product is Phyllostachys nigra (Lodd. ex Lindl.) Munro, and the part used is the leaf.

The specification has a single grade, so there is no ladder of tiers, and the decision concerns format and matrix. At up to 70% silica, the powder is essentially a plant-derived silica carrier with a small amount of leaf polyphenol, and it behaves as an inorganic filler more than as a botanical extract. A formulator who wants a flavonoid-led bamboo leaf ingredient should consider the sibling Bamboo Leaf Extract Powder, which is made from the leaf with no silica figure.

The naming around bamboo leaf is a frequent source of confusion. Bamboo leaf, zhu ye in Chinese herbal practice, comes from bamboo genera such as Phyllostachys, whereas the herb dan zhu ye is Lophatherum gracile, a different grass that resembles bamboo but is not one. Buyers who compare bamboo leaf extract quotes should check the botanical name, the part and the compound that the percentage describes.

The grade is stated as up to 70%, which makes 70% the upper end of the specification. The practical implication is that silica content is reported as a ceiling and should be matched to the lot actually shipped.

Silica Analysis & Purity Risks

Silica is an inorganic constituent and is not measured by the chromatographic methods used for plant markers. The usual routes are gravimetric determination after acid digestion and ignition, colorimetric determination of dissolved silicon, or elemental analysis by plasma spectroscopy, and each reports silicon on a defined basis, as silicon or as silicon dioxide. The numbers from different routes are therefore not interchangeable, and the basis should be stated with any figure.

Because the silica is part of the cell wall, the reading depends on how completely the leaf matrix is digested. A sample that is only partly digested gives a low result, and the digestion conditions are part of the method. The ash of the powder is also dominated by silica, which is why this product is judged by silicon content and not by a low ash value.

The fingerprint of the non-silica fraction shows the flavone C-glycosides in the middle of a reversed-phase run, and their presence confirms that the powder comes from bamboo leaf and not from a purely mineral silica. A powder with no flavonoid peaks at all is a mineral silica or a heavily processed material and does not match the description.

Purity risks follow from the botany and the trade. Silica-rich powders can also be made from rice husk, horsetail and other grasses, and mineral silica can be added to a botanical powder, so a silicon figure alone does not prove a bamboo origin. A named species, the leaf as the stated part and the flavonoid fingerprint protect identity better than a percentage.

Typical Specifications

Specification ItemProduct Information
Latin NamePhyllostachys nigra
Plant PartLeaf & Herb
ProcessingEthanol Extraction
Compound ClassPolyphenols
Common NameBamboo Leaf, Zhu Ye
Ingredient TypeStandardized Extract
Marker Compound(s)Silica of bamboo leaf (hydrated silicon dioxide of Phyllostachys nigra)
Primary Grade70% Silica (up to)
AppearanceGreen powder
Solubility / DispersibilityInsoluble in Water
Quality Parameters
Moisture (LOD)≤5.0%
Total AshNot specified; the ash is mainly silica, see Primary Grade
Particle Size80 mesh
Heavy MetalsLead ≤2 ppm · Arsenic ≤1 ppm · Cadmium ≤1 ppm · Mercury ≤0.1 ppm
MicrobiologyTPC ≤1,000 cfu/g · Yeast & Mold ≤100 cfu/g · E. coli Negative · Salmonella Negative/25 g
Shelf Life24 months in unopened original packaging, cool and dry storage

Applications by Grade

Silica Capsule Fills

The single grade is dosed by weight in capsules, and a typical formula needs a generous fill to reach a silica target. The green powder is light, fine and abrasive, so a flow agent helps the hopper, and fill weights should be checked at the start of each run and after any stoppage.

Tablet Blends With Fillers

Tablets combine the powder with a dry binder and a disintegrant. Because the particles are hard and abrasive, they wear punches and dies faster than plant powders, so tooling should be inspected regularly, and a compression trial shows whether hardness holds after storage.

Dry Mineral-Botanical Blends

Dry blends combine the powder with other mineral and botanical ingredients in measured ratios. The silica acts as a bulking and anti-caking component, but it is dusty, so pre-mix it with a heavier carrier and control dust at the weighing station.

Powder Sachet Premixes

Sachets carry the powder with a sweetener and flavor system. The grade is insoluble in water, so it forms a green, gritty suspension that settles quickly, which suits shake-before-use formats and thick, opaque bases better than clear drinks.

Mineral-Vitamin Premixes

Silica-rich plant powders are often paired with vitamins and minerals in multi-ingredient premixes. In such blends, keep the particle size small, since coarse silica feels gritty, and test the flow of the complete mix before filling.

Technical & Quality Considerations

The powder is green with a faint grassy odor and almost no taste. Silica does not dissolve in water, so the powder remains a gritty suspension in any drink base. The silica itself is chemically inert across a wide pH range, and it neither oxidizes nor ferments, but the flavonoid fraction around it can darken slowly in light and with iron.

Silica dust deserves control. The fine, light powder disperses in the air during weighing, so use local exhaust and a closed transfer where possible, and wear dust protection. Amorphous silica is handled with the same care as other fine inorganic dusts. At production scale, pre-mix the bamboo leaf extract with a portion of the carrier and verify content uniformity on the first batch, since a light powder separates easily from heavier excipients.

The abrasive particles also wear equipment, so inspect screens, feeders and tooling at regular intervals. Compare each lot with a retained sample for color, particle size and flow, keep the drum closed and dry and record the date it was opened. Because the powder is low in sugars, it takes up little moisture, but it can still pick up odors from its surroundings.

Packaging & Commercial Supply

Essencefield supports product evaluation, formulation trials, commercial orders, and ongoing ingredient supply. Packaging, storage, and shipping arrangements are determined by product characteristics, order quantity, stability requirements, and destination-market needs.

Supply ItemGeneral Information
SampleAvailable upon request for formulation, testing, and supplier evaluation
Order Quantities100 g · 1 kg · 5 kg · 25 kg · 100 kg · 500 kg · Bulk
Sample Lead TimeTypically 5–7 days after sample confirmation
Production Lead TimeTypically 15–30 days after order and specification confirmation
PackagingSuitable protective inner packaging with bags, cartons, drums, or other appropriate outer packaging
StorageStore in tightly sealed, suitable protective packaging in a cool, dry environment. Protect from moisture, heat, and direct sunlight. Specific storage conditions follow the approved product specification.
DocumentationCOA · Product Specification · TDS · SDS · Applicable declarations (as applicable)

Final order quantities, lead times, packaging, documentation, and shipping arrangements are confirmed according to the selected product and commercial requirements.

Request Ingredient Specifications & Quote

Share your target specification, application, quantity, and documentation needs. We’ll help confirm suitable options, samples, and commercial supply details.